Login
Register
If one of the three plates in the original drone( Upper Plate (middle), Bottom Plate, and CNC Camera Side Plate) needs to be replaced from V1 to V1.1, you need to replace the following 4 parts with V1.1 at the same time, otherwise, the V1.1 plate will be incompatible.
In other words, you can directly purchase the V1.1 Plate Set. The set will include:
1 x Bottom plate V1.1
1 x Upper plate (middle) V1.1
1 x CNC camera side plate V1.1
1 x Screw package V1.1
Due to manufacturing processes, our products may have a standard manufacturing tolerance of +0.1mm.
Upper(middle) plate thickness: 4mm
Bottom plate thickness: 4mm
Arm Thickness: 8mm
June 19, 2024: The bottom plate, upper plate, CNC camera side plate, and screw package are updated to V1.1. The bottom plate and upper plate are thicker.
1 x Replacement parts for Helion 10 (optional)
Due to manufacturing processes, the thickness of our products may have a standard manufacturing tolerance of ±0.2mm. The size of the hole may have a standard manufacturing tolerance of ±0.1mm.
IFPV Points
