BLITZ F7 Pro Flight Controller

Features

Improved circuit design, better components, and lower electrical noise!

DJI HD VTX Connector (Plug-and-Play / No soldering required)

FC indicator LEDs for visual debugging

512MB BlackBox

With LC filter

Specifications

Mount pattern: 35*35mm/ 4mm PCB hole diameter

Smartaudio / IRC Tramp VTX protocol supported

Firmware target: IFLIGHT_BLITZ_F7_PRO

Input Voltage: 14.8V-34V (4S-8S LIPO)

Motor outputs: 4x (SH1.25 connector)

Flash: 512MB (Blackbox flash)

I2C serial: SDA / SLA pads

Dimensions: 41*41.5mm

Barometer: DPS310

OSD Chip: AT7456E

LED controller: Yes

MCU: STM32 F722

Weight: 17g (±2)

Beeper pad: Yes

Gyro: BMI270

UARTS: 4

Wiring Suggestion

UART1 for VTX HD/Analog

UART2 for Receiver

UART4 for GPS

UART5 for ESC Telemetry

8×Dshot/PWM outputs

1×I2C for GPS Mag

Tips

1. F722 MCU has an inner inverter.

2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX, we suggest you connect to Uart_RX2

3. Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1

4. F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2

Packing List

1 x BLITZ F7 Pro Flight Controller