Free air post shipping over $100, excluding some oversized items

BLITZ F7 Pro Combo Set (E80 Pro 4-IN-1 ESC)


Available Options


If you want to use it for the Taurus X8 V3, Protek60 Pro, X413, or X415 frame kit, please select the "Without CNC" option.

FC Features

Improved circuit design, better components, and lower electrical noise!

DJI HD VTX Connector (Plug-and-Play / No soldering required)

FC indicator LEDs for visual debugging

512MB BlackBox

With LC filter

FC Specifications

Product Name: BLITZ F7 Pro Flight Controller

Mount pattern: 35*35mm/ 4mm PCB hole diameter

Smartaudio / IRC Tramp VTX protocol supported

Firmware target: IFLIGHT_BLITZ_F7_PRO

Input Voltage: 14.8V-34V (4S-8S LIPO)

Motor outputs: 4x (SH1.25 connector)

Flash: 512MB (Blackbox flash)

I2C serial: SDA / SLA pads

Dimensions: 41*41.5mm

Barometer: DPS310

OSD Chip: AT7456E

LED controller: Yes

MCU: STM32 F722

Weight: 17g (±2)

Beeper pad: Yes

Gyro: BMI270


FC Wiring Suggestion

UART1 for VTX HD/Analog

UART2 for  Receiver


UART5 for ESC Telemetry

8×Dshot/PWM outputs 

1×I2C  for GPS Mag

ESC Description

The MOSFET used by BLITZ E80 is PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with a

maximum power dissipation of 198W. BEC power supply adopts TI automotive-grade dedicated synchronous rectifier

chip, supporting up to 100V.

The 1-4 layer power board of the PCB circuit is ultra-thick copper with a thickness of 4OZ, ensuring continuous output under high-power operation. The STM32F051 main control processor with a running frequency of up to 48MHz, combined with a three-in-one driver IC, achieves a faster running speed!

ESC Features

Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection

G071 MCU, 48mHz maximum clock speed;

TDK MLCC Low ESR ceramic capacitors;

Top grade PSMN1R0-40YLD MOSFET;

8 layers double-sided PCB board

ESC Specifications

Product Name: BLITZ E80 4-IN-1 ESC

Input Voltage: 2-8S

Max. Continuous Current: 80A

Max. Burst Current: 100A

MCU: G071


Firmware: BLHeli32

Current Sensor: Yes

Telemetry: Supported


Mounting Dimensions: 35x35mm/Φ3mm

Dimensions: 35x42mm

Weight: 65g(±10)

Protocal:Supports DShot DShot150/300/600/MultiShot/ OneShot etc


November 8, 2023: BLITZ E80 Pro 4-IN-1 ESC with CNC Alum Cover updated to a more closed cover.

Packing List

1 x BLITZ F7 Pro Flight Controller

1 x BLITZ E80 4-IN-1 ESC (Combo1)

2 x BLITZ E80 4-IN-1 ESC (Combo2)

1 x 50V 470UF capacitor Plate

2 x 50V 470UF capacitor

1 x Wiring set

1 x USB Adapter Board

Write a review

Please login or register to review
  • BLITZ F7 Pro Flight Controller Wiring Diagram 05/07/2023 5.95MB
  • BLITZ E80 4-IN-1 Pro (G2) ESC Wiring Diagram 05/07/2023 585.47KB
  • ����ͼƬ·��
$1 IFPV PointsIFPV Points