BOB46 O4 6S HD

The Bob46 is the best of both 4 and 6 inch. 2RAW’s newest addition to its lineup in the 5inch category. Targeted at content creators who want a drone that has balanced well rounded performance. The BOB46 doesn't compromise in any areas it allows for the creator to have maximum options to be used in almost every scenario. 

All iFlight BNFs are tested before shipment to guarantee the highest quality. 

If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.

June 24, 2025: BNF adds Hand Catch Stick as standard.

1. iFlight product is for fun purposes only and does not support autonomous flight.

2. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:

(1) Any military combat purpose or military combat related use;  

(2) Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.

3. iFlight Partners must strictly adhere to applicable export control and sanction laws as well as any written compliance requirements regarding these controls issued by iFlight from time to time.

If Party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.

For more specific content, please check: https://shop.iflight.com/Export-Policy-info

HELION -  The Ultra Range flagship by 2RAW and ilfight 

This frame kit was built to redefine Long Range and take it to a whole new level and to meet the rising demands for more range, and more flight time while maintains enough weight, to have excellent stability in even the most windy conditions. With a size of 10 inches, Helion is not only capable of effectively carrying large (Recommended, 4500mAh Lipo and above)  batteries while ensuring great efficiency but also has a lot of power. You will recover better when diving and have overall more control than traditional long-range drones. Its unique aerodynamic shell allows for easy maintenance while protecting the cores of the power train when in use. Helion’s distinct frame design was scientifically optimized to balance perfectly between stability, weight, and rigidity. 

No props in view from 40-0 degrees in both FPV feed and Action camera feed.

Front facing and reversible Action camera mounting options.

Larger body length to allow for bigger batteries for more flight time.

Small size for easy transport for content creation in remote locations

2RAW tuned, flawless footage in all conditions

Encased body to protect electronics from dirt and debris when filming

July 26, 2024: The bottom plate, upper plate, screw package, and CNC camera side plate were updated to v1.1. The bottom plate and upper plate thickness increased.

April 24, 2025: Frame Kit was upgraded from O3 version to O4 version.

Product Name: BOB46 O4 6S HD BNF

FC: BLITZ Mini F7 FC

ESC: BLITZ Mini E55 4-IN-1 ESC

Video Transmission: DJI O4 Air Unit Pro

Frame: 226mm(wheelbase)

Motor: XING2 2207 1750KV  motors

Prop: Nazgul F5 propellers

Weight: 489±5g

Takeoff Weight: Approx.731±5g (With 6S 1480mAh)

Dimensions (L×W×H): 212*206*44mm

Max Speed: 165 km/h 

Maximum Takeoff Altitude: 7000 m

Max Hover Time: Approx. 12-13 min (No Load with 6S 1480mAh)

Operating Temperature Range: -20° to 40° C

Antennas: Single Antenna

GNSS: GPS+SBAS+Galileo+QZSS+Glonass

Aero-Shell

The unique aerodynamic shell allows for easy maintenance while protecting the cores of the power train. Users can simply open and close the shell when working on the drone. The idea was to protect the inside but give people full access when maintenance work is being performed on the drone. 

Innovative A-Frame for Maximum Performance

The frame was scientifically optimised and tested over months to find the balance between stability and weight. The A-Frame design minimises vibrations as well as torsion, one of the biggest problems with larger drones. 

Product Name: DJI O4 Air Unit Pro 

Image Sensor: 1/1.3-inch

Lens: FOV: 155°

ISO: 100-25600

Video Resolution: 1080p/100fps H.265

Video Format: MP4, Max Video Bitrate: 130Mbps

Color Mode: Normal Mode/D-Log M

Stabilization: RockSteady 3.0+ ; Stabilization function off (When RockSteady is enabled, the shooting angle only supports standard.)

Live View Quality: 1080P@100fps

Operating Frequency: 5.170-5.250 GHz  & 5.725-5.850 GHz

Transmitter Power (EIRP): 5.1GHz＜23dBm(CE)/5.8GHz＜33dBm(FCC)/＜14dBm(CE)/＜30dBm(SRRC))

Max Video Transmission Range: With DJI Goggles 3/DJI Goggles N3: 15 km (FCC), 8 km (CE), 8 km (SRRC)

Communication Bandwidth: Max 60 MHz

Antenna: Dual antennas

Built-in Storage: 4GB

Supported SD cards: microSD (up to 512GB)

Operating Temperature: -10° to 40° C

Weight: Air Unit (camera module included): Approx. 32 g

Dimensions: Transmission Module: 33.5×33.5×13 mm (L×W×H)

Product Name: Helion 10 Frame Kit

Geometry: A-Frame

Frame wheelbase: 418mm

Frame Dimension: L324*W264*H63 mm

Frame Body Dimension: 63mm

Arm Thickness: 8mm

Bottom Plate Thickness: 4mm

Upper Plate Thickness: 4mm

Max Flight Stack Height: 25mm(O3 Ver.) / 21mm(O4 Ver.)

Max VTX Height: 22mm

Flight Stack Mounting: 30.5*30.5/Φ3mm

VTX Mounting: 25.5*25.5/Φ1.6mm(O3 Ver.) / 25.5*25.5/Φ2mm(O4 Ver.)

Motor Mounting: 19*19-φ3mm

Weight: 540±20g

Compatibility: DJI O3 Air Unit/HD Vista/BLITZ Whoop 1.6W VTX(O3 Ver.) / DJI O4 Air Unit Pro(O4 Ver.)

1 x BOB46 O4 6S HD BNF

1 x Antenna

1 x Battery pads

2 x Prop(Pairs)

1 x Hand Catch Stick

1 x Helion 10 Frame Kit

1 x TPU Set

4 x Motor Wire Shield Tube

2 x Battery Anti-Slip Pad

2 x Battery Strap

1 x Screw Bag

All iFlight BNFs are tested before shipment to guarantee the highest quality. 

If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.

Due to manufacturing processes, the thickness of our products may have a standard manufacturing tolerance of ±0.2mm. The size of the hole may have a standard manufacturing tolerance of ±0.1mm.

1. iFlight product is for fun purposes only and does not support autonomous flight.

2. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:

(1) Any military combat purpose or military combat related use;  

(2) Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.

3. iFlight Partners must strictly adhere to applicable export control and sanction laws as well as any written compliance requirements regarding these controls issued by iFlight from time to time.

If Party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.

For more specific content, please check: https://shop.iflight.com/Export-Policy-info

DJI Goggles 3 / DJI Goggles N3+ DJI FPV Remote Controller 3 

DJI Goggles 2 / DJI Goggles Integra+ DJI FPV remote control 2

(Or another Radio to match the RX in the Drone)

The flight control firmware needs to be configured to support the SBUS protocol so that the DJI FPV remote controller can be used.

iFlight's new generation FPV drone, the 7-inch long-range CineLR 7, combines sleek design, easy maintenance, and a high-performance electronics system. Designed for immersive FPV experiences and professional video recording, CineLR 7 delivers exceptional flight performance and cinematic-quality footage. Whether you're tackling freestyle tricks, high-speed pursuits, or long-range filming, CineLR 7 is engineered to meet diverse flying needs with precision and reliability.