Nazgul XL10 V6 6S

It's proud to announce the release of the XL10 V6 analog BNF, XL10 V6 6S Analog is a 10" BNF quadcopter that comes with the BLITZ Whoop 1.6W VTX Video Transmission System, and HQ  10" 3-Blade  propellers. The XL10 V6 has been pre-tuned and set up with everything you need, all you need to do is bind-and-fly! Loaded with lots of power; it comes with the XING2 3314motors, BLITZ F7 Flight Controller, and the BLITZ E55 4-IN-1 ESC, which make this quad a must-have!

The XL10 V6 BNF fly is balanced because of the true X configuration and wide stance. These main changings make flight stable in the air.

Full 3K Carbon Fiber airframe

Popular True-X configuration

Big size XING2 3314 with extreme lift and flight performance

GPS module pre-installed (BF GPS rescue or INAV GPS RTH feature available)

July 6, 2023: Camera changed from RunCam Phoenix2 SE Mini to RaceCam R1 Mini.

August 2023: Arm Guards' color changes from green to black.

March 1, 2024: The motor is changed from XING2 3110 900KV to XING2 3314 900KV.

May 8, 2024: The Albatross antenna is available in two versions, and will be shipped randomly.

Product Name: XL10 V6 Analog 10 inch

FC: BLITZ F722 Flight Controller

ESC: BLITZ E55 4-IN-1 2-6S 55A ESC

Video Transmission: BLITZ Whoop 1.6W VTX/ BLITZ whoop 2.5W VTX

Frame: 420mm wheelbase

Motor: XING2 3314 900KV motors

Prop: HQ 10X4.5X3 propellers

Weight: 860g (Without Battery)

Dimensions (L×W×H)：297x297x35mm

Max Speed: 140km/h

Maximum Takeoff Altitude: 6000 m

Max Hover Time: Approx. 40 min (with 21700 6S2P 8000mAh no load)

Operating Temperature Range: -10° to 40° C (14° to 104° F)

Antennas: Single Antenna

GNSS: GPS+SBAS+Galileo+QZSS+Glonass

Product Name: BLITZ Whoop 5.8G 1.6W VTX

Output Power: PIT/25mW/400mW/800mW/1600mW

Input Volts: 12V

Working Current: ≤pit @40mA，≤25mw@150mA，≤400mw@330mA，≤800mw@460mA，≤1600mw@660mA

Transmission fre: 40CH(A-B-E-F-R)

Antenna Interface: IPEX

Mounting Hole: 25*25/φ1.6mm

Weight: 16.5 g (Without antenna and cable)

Dimensions: L37mm*W31.5mm*H10mm

Product Name: BLITZ Whoop 5.8GHz 2.5W VTX

Output Power: PIT/25mW/400mW/1000mW/2500mW

Input Volts: 7-34V

Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA

Transmission fre: 40CH(A-B-E-F-R)

Antenna Interface: MMCX

Mounting Hole: 25*25/φ1.6mm

Weight: 32g

Dimensions: 50*30*16mm

1 x XL10 V6 6S Analog BNF

1 x Battery pad

1 x Antenna

2 x Propellers(Pair)

2 x Battery strap

1 x Screw Bag

1. iFlight product is for fun purposes only and does not support autonomous flight.

2. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:

(1) Any military combat purpose or military combat related use;  

(2) Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.

3. iFlight Partners must strictly adhere to applicable export control and sanction laws as well as any written compliance requirements regarding these controls issued by iFlight from time to time.

If Party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.

For more specific content, please check: https://shop.iflight.com/Export-Policy-info