Do NOT upgrade the firmware!!! It will damage the camera.
When you receive and start using G3, do not update the G3 version, please continue to use the V1.2.18 version.
When the app reminds you to update, click cancel update.
1 x iFlight GOCam PM G3 Action Camera
1 x BEC adapter cable
1 x Camera TPU mount
1 x User Manual
Video resolution: 4000x3000@24/25/30fps,3840x2160@24/25/30/60fps,2720x1530@24/25/30/60/100fps,1920x1080@24/25/30/60/120/200fps
Video mode: Normal video, HDR video, time-lapse photography, TimeShift mobile phone time-lapse video; Pro stabilization mode (use Insta360 App/Studio or supported plug-in export to achieve FlowState Stabilization)
Video encoding: H.264 / H.265
Video maximum bit rate: 100Mbps
Wi-Fi: 5G (standard range is about 2m)
Input Voltage: 6V - 27V (2-6S)
Micro SD card: recommended UHS-I V30 and above, exFAT (FAT64) format (maximum storage capacity 1T)
Working temperature: -20°C ~ 40°C
Video format: Insv (export via APP or Studio), Mp4
*The 1.2.16 firmware and subsequent firmware versions adjust the original INSV format to MP4 format, the file name prefix must be marked with "PRO_", and the flow stabilization effect is exported through APP or Studio
Memory Card Type: MicroSD, capacity up to 256GB. Recommend U3 (2.7K50/2.7K60 and 1080P120 requires U3 or higher; other resolutions require U1 or higher). Please make sure that the file format of the SD card is FAT32/exFAT.
Supports up to 4K/60FPS
FlowState Stabilization (Gyro based stabilization feature)
Small size and light weight (37g without battery)
Full App control; Change settings using the insta360 ONE R smartphone application
UART communication interface; Control your cam through your flight controller