Borg Mini H7 Stack (60RS 4-IN-1 ESC)
Introducing the All-New Borg Series – Power Meets Precision!
The Borg Mini H7 Flight Stack is specifically designed for racing fpv, providing unmatched performance. Elevate your racing experience with the cutting-edge technology of the Borg Series!
Flight Controller Features
Supports 4S to 8S battery inputs, offering versatility for various racing setups.
Integrated 12V BEC provides stable power for your VTX system and allows remote control to switch it on and off.
FPC cables ensure secure connections with ESCs enhance reliability across.
Onboard ELRS 2.4G receiver with external antenna, supports switching to external receivers.
Onboard 4 LED strip interfaces with short-circuit protection, so an LED short circuit will not affect flight controller operation.
ESC Features
Support 4- 8S Battery Input for versatile power options.
8-Layer 3OZ PCB allows for continuous current handling of 60A, with a peak current of 65A.
Integrated Anti-Spark Filter protects your equipment from voltage spikes.
Built-in High Polymer Capacitors eliminate the need for external capacitors in racing models.
FPC Ribbon Cable Connection ensures a more reliable link between the flight controller and ESC.
Flight Controller Specifications
Product Name: Borg Mini H7 Flight Controller - SMD Receiver
Input voltage: 4-8S; Support LIHV battery
MCU: STM32H743VIH6
Gyro: ICM42688
OSD Chip: AT7456E（LGA）
Flash: 32MB (Blackbox flash)
UARTS: 5
Motor outputs: 4
I2C serial: Support
VTX protocol: support DJI MSP/Smartaudio/IRCTramp/HDZero
LED controller: Yes
Beeper pad: Yes
Betaflight Firmware target: IFLIGHT_BORG_Mini_H7
Mount pattern: 20*20 φ4
Dimensions: 36*27mm±1
Weight: 7.7g±1
BEC: 5V 2.5A, 12V 2A (12V with VTX switch)
SMD Receiver Specifications
MCU: ESP8285
RF: SX1281
Receiver Type: 2.4GHz
Telemetry power: 100mW (20dBm)
LNA: YES
Lua Script: iFlight 2400 RX
TCXO: Yes
Firmware: iFlight2.4GHz_2400_RX
ESC Specifications
Product Name: Borg 60RS ESC
Input Voltage: 4-8S; Support LIHV battery
Max. Continuous Current: 60A
Max. Burst Current: 65A (10s)
MCU: STM32G071N
Driver: FD6288
Firmware: BL32 (32bit ESC)
Target: IFLIGHT_BLITZ_G3 32.9
Current Sensor: No
BEC: No
Telemetry: Supported
Bidirectional DSHOT: Supported
Dimensions: 45*35mm±1
Mounting Holes: 20 x20 mm/Φ4mm
Protocol: Supports DShot150/300/600、MultiShot、OneShot etc.
UART 1 for VTX HD / Analog
UART 2 for ESC Telemet
UART 4 for On-board Receiver
UART 7 for GPS or other sensors that require a serial port
UART 8 for GPS or other sensors that require a serial port
1 x Borg Mini H7 Flight Controller With SMD Receiver
1 x Borg 60RS 4-in-1 ESC
1 x Cable set
5 x silicon grommets
resource PINIO 1 PD10
set pinio_config = 1,1,1,1
set pinio_box = 40,41,255,255
set box_user_1_name = VTX_ON_OFF
aux 0 40 8 900 2100 0 0
save
