Front-Mounted Air Unit
Reduced Interference.
Reduced Interference.
New Injection-Molded Components.
Enhanced Safety and Stability.
Enhanced Stability for Long-Range Flight.
LED Lighting Effects.
Powerful Heat Dissipation.
Introducing the new 7-inch Nazgul Evoque—packed with 6 key upgrades for immersive long-range flights. It inherits the series' DC geometry, delivering cinematic shots free of prop obstruction. Equipped with the DJI O4 Pro Air Unit, it supports seamless video capture and output, letting you capture unobstructed mountain and sea views effortlessly. Enjoy extended flight time to fly and create without limits.
Dualband Dual-Antenna, Enhanced Long-Range Stability
With an optional ELRS dualband dual-antenna receiver, supporting simultaneous 2.4GHz + 900MHz communication. Paired with a dual-antenna, fan-shaped distributed layout for omnidirectional signal reception, it ensures stable, controlled long-range flights even in complex environments.
Upgraded Borg Stack
The upgraded Borg Stack features a built-in anti-spark filter, dual independent BEC power supply (12V 2A with VTX switch + 5V 25A) for stable power, and a built-in polymer capacitor to extend device lifespan.
Fin-Shaped Cooling Channel
The fin-shaped cooling channel design enhances heat dissipation and ensures stable long-range flight performance. It comes with Dynamic LED effects full of recognition and technological sense.
Flagship Recording Capability Equipped with DJI O4 Air Unit Pro
Upgraded with a 1/1.3-inch image sensor, delivers remarkable performance in low-light and night environments. Capture low-altitude, high-speed flight footage in 4K resolution with an ultra-wide 155° FOV. Experience the immersive visual impact of flight like never before, with crisp 4K output that effortlessly meets your creative needs.
Product Name: Nazgul Evoque F7 O4 6S HD
Geometry: Deadcat(DC)
FC: Borg Mini F7 Flight Controller
ESC: Borg 60R ESC
Video Transmission: DJI O4 Air Unit Pro
Frame: 321mm wheelbase
Motor: XING2 2809 1250KV motors
Prop: HQ 7.5X3X3 propellers
Weight: 765±5g(Without Battery)
Takeoff Weight: Approx. 1620±5g (incl. 21700 6S 10000mAh)
Dimensions (L×W×H): 284*283*53mm
Max Speed: 140km/h
Maximum Takeoff Altitude: 7000 m
Max Hover Time: Approx. 25min with 6S 8000-10000mAh battery No Load
Recommended load: 800g
Operating Temperature Range: -20° to 40° C
Antennas: Dual Antennas
GNSS: GPS+SBAS+Galileo+QZSS+Glonass
Battery plug: XT60
Product Name: DJI O4 Air Unit Pro
Image Sensor: 1/1.3-inch
Lens: FOV: 155°
ISO: 100-25600
Video Resolution: 1080p/100fps H.265
Video Format: MP4, Max Video Bitrate: 130Mbps
Color Mode: Normal Mode/D-Log M
Stabilization: RockSteady 3.0+ ; Stabilization function off (When RockSteady is enabled, the shooting angle only supports standard.)
Live View Quality: 1080P@100fps
Operating Frequency: 5.170-5.250 GHz & 5.725-5.850 GHz
Transmitter Power (EIRP): 5.1GHz<23dBm(CE)/5.8GHz<33dBm(FCC)/<14dBm(CE)/<30dBm(SRRC))
Max Video Transmission Range: With DJI Goggles 3/DJI Goggles N3: 15 km (FCC), 8 km (CE), 8 km (SRRC)
Communication Bandwidth: Max 60 MHz
Antenna: Dual antennas
Built-in Storage: 4GB
Supported SD cards: microSD (up to 512GB)
Operating Temperature: -10° to 40° C
Weight: Air Unit (camera module included): Approx. 32 g
Dimensions: Transmission Module: 33.5×33.5×13 mm (L×W×H)
1 x Nazgul Evoque F7 O4 6S HD
1 x Battery pad
2 x 7.5 inch Prop(Pairs)
2 x Battery strap
1. iFlight product is for fun purposes only and does not support autonomous flight.
2. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:
(1) Any military combat purpose or military combat related use;
(2) Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.
3. iFlight Partners must strictly adhere to applicable export control and sanction laws as well as any written compliance requirements regarding these controls issued by iFlight from time to time.
If Party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.
For more specific content, please check: https://shop.iflight.com/Export-Policy-info
4. The BNF does not include the remote control, goggles, GoPro, battery, or charger, which need to be purchased separately for compatible use.
No, the battery connector is not waterproof. If the inside of the battery connector contact with moisture/water may create a risk of short circuits and corrosion. If the inside of the connector gets wet, please ensure it is completely dry before any subsequent use.
-------iFlight Support Team
You can safely replace external components such as antennas, top plates, and propellers. These parts are designed for user replacement and do not compromise the internal seals that provide water resistance.
-------iFlight Support Team
We strongly advise against it. Salt crystals can clog and corrode the critical seals that provide water resistance, while also aggressively attacking metal and electronic parts. This significantly increases the risk of sudden failure. If the drone is accidentally exposed to saline, please rinse thoroughly with fresh water and dry completely in time.
-------iFlight Support Team
Yes, customers can choose receiver upgrading or changing after receiving it. However, please be aware that any internal modifications will void the original IPX8 waterproof rating. We strongly recommend selecting your preferred receiver version at the time of purchase.
Disclaimer: User-performed modifications are not covered under warranty and may affect product performance and durability.
-------iFlight Support Team
The Nazgul Evoque F7 achieves an IPX8 waterproof rating.
Disclaimer: Please note that the IPX8 rating is based on controlled test conditions. Actual performance may vary depending on usage, water pressure, temperature, and other environmental factors. It is recommended to avoid exposing the product to harsh chemicals, saltwater, or high-pressure water jets. Always ensure all seals are intact and dry the device thoroughly after any contact with water.
-------iFlight Support Team
| Time | Points | Detailed description |