Taurus X8 Pro Max V2 8S HD Cinelifter

Born for on-site creation, the upgraded Taurus V2 professional aerial drone is fully optimized to boost shooting efficiency. Equipped with an updated cinematic gimbal quick-switch system, it supports flexible top and bottom mounting to meet diverse multi-angle shooting demands. The dual-voltage BEC module delivers safe and stable power supply for cameras and gimbals, compatible with mainstream professional filming devices, perfectly empowering high-grade aerial cinematography.

New PDB Layout, Lightweight and Reliable

Redesigned wiring layout reduces exposed cables and enables a cleaner integrated build, lowering the risk of electrical failures while maintaining stable performance during high-speed flights.

Dual-Voltage BEC System, Engineered for Cinema Cameras

Integrated 12V/15V physical power switch enables instant power adaptation for a wider range of cinema camera setups — delivering smarter, more flexible on-set workflows.

Flagship H7 Pro Electronics,  Outstanding Performance

BLITZ H7 Pro Flight Controller and BLITZ E80 Single ESC *8, Dual-Sided Shielding Protection for Enhanced Interference Resistance.

Vertical Dual-Band Antenna, Anti-Interference, Enhanced Reception

Traditional T-type antennas are replaced with an upgraded dual-band receiver antenna. Foldable design for easy storage, delivering strong and stable signal even in complex outdoor environments.

Upgraded SMA Antenna Mount

A fixed-interface design for a secure and stable connection. Quick twist-on/off design for easy installation and storage.

Quick-Release Battery System

Optimized dual-battery quick-release rail system. One press to lock with a secure "click" fit. Enables rapid battery swaps for seamless and efficient continuous flight.

All-Scenario Compatibility, Top & Bottom Gimbal Quick Switch

Dual top and bottom quick-release mounts for flexible gimbal switching. Fast multi-angle transitions for film production, meeting diverse on-set needs.

Eight-Motor Power, Powerful Performance

Equipped with eight 3616 motors and 11-inch propellers, requiring only 30% throttle for unloaded hover. Speeds up to 170 km/h deliver high-impact cinematic footage. 

Dual 8S High-Capacity Batteries

Supports dual 8S 21700 10000mAh batteries, providing up to 25 minutes of hover time unloaded and around 13 minutes cruising with payload, reducing battery swaps for more efficient filming.

4.5 kg Heavy Payload Capacity

Effortless mounting for professional cinema cameras such as the Sony FX6 and RED Komodo, as well as professional gimbal systems. No additional modifications required, delivering an all-in-one mounting solution for cinema-grade production workflows.

Product Name: Taurus X8 Pro Max V2 O4 8S

FC: BLITZ H7 Pro Flight Controller

ESC: BLITZ E80 Single ESC(with CNC Alum Cover)

Video Transmission: DJI O4 AIR Unit Pro

Frame: 610mm wheelbase

Motor: XING2 3616 760KV motors

Prop: HQ 11*7.5*3 propellers

Weight: 3800±20g (Without cinema camera)

Takeoff Weight: Approx. 6200±20g (With 2*8S 10000mAh Battery)

Dimensions (L×W×H): 587×411×73 mm

Max Speed: 170 km/h

Maximum Takeoff Altitude: 7000 m

Max Hover Time: Approx. 25 min with No Load and 2*8S 10000mAh battery

  Approx. 16 min with 2.5KG load and 2*8S 10000mAh battery

Max Cruising Time: Approx. 13 min with 2.5KG Load and 2*8S 10000mAh battery(80km/h)

Recommended Payload: 3KG

Max Payload: 4.5KG

Operating Temperature Range: -10° to 40° C (14° to 104° F)

Antennas: Dual Antennas

GNSS: GPS+SBAS+Galileo+QZSS+Glonass

Battery plug: XT90

Product Name: DJI O4 Air Unit Pro 

Image Sensor: 1/1.3-inch

Lens: FOV: 155°

ISO: 100-25600

Video Resolution: 1080p/100fps H.265

Video Format: MP4, Max Video Bitrate: 130Mbps

Color Mode: Normal Mode/D-Log M

Stabilization: RockSteady 3.0+ ; Stabilization function off (When RockSteady is enabled, the shooting angle only supports standard.)

Live View Quality: 1080P@100fps

Operating Frequency: 5.170-5.250 GHz  & 5.725-5.850 GHz

Transmitter Power (EIRP): 5.1GHz＜23dBm(CE)/5.8GHz＜33dBm(FCC)/＜14dBm(CE)/＜30dBm(SRRC))

Max Video Transmission Range: With DJI Goggles 3/DJI Goggles N3: 15 km (FCC), 8 km (CE), 8 km (SRRC)

Communication Bandwidth: Max 60 MHz

Antenna: Dual antennas

Built-in Storage: 4GB

Supported SD cards: microSD (up to 512GB)

Operating Temperature: -10° to 40° C

Weight: Air Unit (camera module included): Approx. 32 g

Dimensions: Transmission Module: 33.5×33.5×13 mm (L×W×H)

1 x Taurus X8 Pro Max V2 O4 BNF

4 x HQ 11X7.5X3 CW propeller

4 x HQ 11X7.5X3 CCW propeller

2 x Albatross LHCP 5.8GHz SMA FPV Antenna V2 - 130mm

1 x XT90 Male to XT60 Female Adapter Wire

2 x 20*400mm Battery Strap

4 x 20*500mm Battery Strap

1 x Drone Case

1 x Lading Pad

2 x Fullsend 8S 10000mAh Battery

1 x Prop Wrench

All iFlight BNFs are tested before shipment to guarantee the highest quality. 

If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.

1. iFlight product is for fun purposes only and does not support autonomous flight.

2. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:

(1) Any military combat purpose or military combat related use;  

(2) Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.

3. iFlight Partners must strictly adhere to applicable export control and sanction laws as well as any written compliance requirements regarding these controls issued by iFlight from time to time.

If Party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.

For more specific content, please check: https://shop.iflight.com/Export-Policy-info

4. The cinema camera shown on the page is for display only. The BNF does not include the remote control, goggles, cinema camera, or charger, which need to be purchased separately for compatible use.